Connections Glossary

Key Features

• Thunderbolt™ 5 Dock (80Gbps / up to 120Gbps Bandwidth Boost)

• Triple Display Support

  • 1× Thunderbolt 5 video output

  • 2× HDMI ports

  • Supports up to single 8K@120Hz, dual 8K@60Hz, or triple 4K@144Hz (system dependent)

• 13-in-1 Expansion

  • 2× USB-C (10Gbps)

  • 1× USB-A (10Gbps)

  • 2× USB-A (5Gbps)

  • SD / TF Card Reader (SD 4.0, 312MB/s)

  • 2.5Gb Ethernet

  • 3.5mm Audio Jack

• Built-in M.2 NVMe SSD Enclosure

  • PCIe Gen4 x4, up to 6000MB/s

  • Supports 2230 / 2242 / 2260 / 2280 SSDs (up to 4TB)

• Powerful Charging

  • Up to 140W host charging (PD 3.1)

  • 30W USB-C charging for phones & tablets

  • Smart power distribution

• Wide Compatibility

  • Thunderbolt 5 / 4 / 3, USB4, USB-C DP Alt Mode

  • Compatible with Windows and macOS (display support varies by system)

How to equip external NVME - SSD

1. In case you want to install a supported SSD, Please slide the lid on the bottom side of the CSV-2562 open and insert the SSD. Make sure you secure the SSD firmly with its "locks".  Close the lid and power up the unit. The SSD will show up as an external drive on your windows / Mac OS system.

                                                                                                    

The CSV-2562 comes with the Intel Thunderbolt™ Share license.

 How to Install Thunderbolt™ Share

Thunderbolt™ Share is a software tool from Intel that enables PC-to-PC experiences between two supported host systems with either Thunderbolt 4 or Thunderbolt 5 and a Thunderbolt™ Share licensed PC or the Club 3D CSV-2562 Thunderbolt 5 docking station and/or any Thunderbolt™ Share accessory.

Intel offers an extensive Thunderbolt™ Share FAQ page here as well: FAQ About Thunderbolt™ Share, and requirements information can be found here: Thunderbolt™ Share - Licensed Configurations & Hardware Requirements

 The latest Thunderbolt™ Share application can be downloaded from Intel here

1. For Installation please refer to the installation guide from Intel here: Thunderbolt™ Share Application Setup

Please note:

• The Thunderbolt™ Share application must be installed on both host systems
• Only one PC or Thunderbolt accessory needs to be Thunderbolt™ Share licensed
• Intel Graphics driver, version 0.101.4826 (or higher) is required, download the latest here

How to Use Thunderbolt™ Share

After installing Thunderbolt™ Share on both systems please launch the application on each host

1. Connect each host and use the, supplied CAC-2501 Thunderbolt™ 5  Certified Cable to connect the CSV-2562 to your host device (Windows10™ or above version supported Thunderbolt™ 5 host / MacOS™11 or above version supported Thunderbolt™ 4/5 host) 
2. Use the Power Adapter to connect the CSV-2562 to a wall socket. 

  (Some devices may need a driver / firmware update to get the highest/best performance)

1. Once both hosts are connected to the licensed accessory the application should indicate that a connection has been established
2. The main menu of Thunderbolt™ Share will now be available for you to choose the following actions:
1. Control Other Computer
2. Sync Files
3. Drag & Drop Files
4. Transfer Data to New Computer

Supported Displays and Resolutions

1.  Connect your Display(s), mouse, keyboard and/or any other devices to the CSV-2562 with cables that support the Device specification to get the most out of the connection. 
2. You can connect a single or multiple displays to your CSV-2562 according to the following table